Brew 102 rubout side panel

Discussion issues on Beer Cans,, Breweriana, Attended Shows etc...

Moderators: Forum Moderator, Current Officers, Previous Officers

User avatar
Ziphippie
Grand Marshall of Rust
Grand Marshall of Rust
Posts: 1813
Joined: Tue Aug 26, 2014 2:58 pm
Answers: 0
Rusty Bunch Member Number: 0
Year Started Collecting: 1970
Has thanked: 10 times
Been thanked: 563 times
Status: Offline

Brew 102 rubout side panel

#1

Post by Ziphippie »

Different wording on the rubout than the one in the supplement. What gives? Ziphippie
AE9D0973-9360-4222-A09E-CDDE81EE3E7A.jpeg
DECA7E02-D88A-4BA7-93C7-725EF8869A59.jpeg


User avatar
keithker
Rusty Bunch President
Rusty Bunch President
Posts: 4836
Joined: Thu Jan 12, 2012 6:40 pm
Answers: 0
Rusty Bunch Member Number: 969
BCCA Number: 11507
Year Started Collecting: 1975
Location: Brandon Florida
Has thanked: 1149 times
Been thanked: 1932 times
Zodiac:
Status: Offline
United States of America

Re: Brew 102 rubout side panel

#2

Post by keithker »

@hover31 Head......exploding
Scott
Rust Governor
Rust Governor
Posts: 2359
Joined: Sun Aug 20, 2006 7:35 pm
Answers: 0
Rusty Bunch Member Number: 442
BCCA Number: 14868
eBay name: No longer in use
Year Started Collecting: 1974
Location: Beaver Nation
Has thanked: 2 times
Been thanked: 230 times
Status: Offline

Re: Brew 102 rubout side panel

#3

Post by Scott »

My Maier 102 has same side panel.
Attachments
20210606_214750.jpg
20210606_214739.jpg
The luckiest dumpers don't rely on good fortune, the unluckiest do.

The information contained in this communication and any attached documentation may be privileged, confidential or otherwise protected from disclosure and is intended only for the designated recipient(s).
User avatar
Ziphippie
Grand Marshall of Rust
Grand Marshall of Rust
Posts: 1813
Joined: Tue Aug 26, 2014 2:58 pm
Answers: 0
Rusty Bunch Member Number: 0
Year Started Collecting: 1970
Has thanked: 10 times
Been thanked: 563 times
Status: Offline

Re: Brew 102 rubout side panel

#4

Post by Ziphippie »

Thanks for the pic Scott! It took about three hours with a q-tip to rub just the side panel, it went from the Maier label directly to the Zobelein with no primer in between. The base coat white on the Zob’s is an eighth of an inch thick it seems. Not sure I can tackle this one until a later date. Ziphippie
Post Reply Previous topicNext topic

Return to “General Discussion”