- Pabst GA
- 100_6185.JPG (113.33 KiB) Viewed 1207 times
- Pabst Pale Dry GA
- 100_6187.JPG (108.32 KiB) Viewed 1203 times
Two 6 oz. Pabst Cans
Moderators: Current Officers, Previous Officers
-
Soda Can Fan
- Rust Master
- Posts: 498
- Joined: Fri Sep 22, 2006 7:13 am
- Rusty Bunch Member Number: 0
- BCCA Number: 10291
- eBay name: oldwun
- Year Started Collecting: 1975
- Been thanked: 23 times
- Zodiac:
- Status: Offline
Two 6 oz. Pabst Cans
Here's a pic of a couple 6 oz. Pabst cans that I recently had rolled. The can labeled as Pale Dry was undocumented before now:
-
Pokey
- Grand Marshall of Rust
- Posts: 1573
- Joined: Sun Aug 20, 2006 10:38 pm
- Rusty Bunch Member Number: 0
- BCCA Number: 30985
- eBay name: pokey-reames
- Year Started Collecting: 1974
- Location: Land of the Goddess of Victory
- Has thanked: 14 times
- Been thanked: 67 times
- Zodiac:
- Contact:
- Status: Offline
Re: Two 6 oz. Pabst Cans
Nice cans - or ex-sheets! Where did you find the 6-oz lids?
“Common sense is not so common" - Voltaire.
-
Soda Can Fan
- Rust Master
- Posts: 498
- Joined: Fri Sep 22, 2006 7:13 am
- Rusty Bunch Member Number: 0
- BCCA Number: 10291
- eBay name: oldwun
- Year Started Collecting: 1975
- Been thanked: 23 times
- Zodiac:
- Status: Offline
Re: Two 6 oz. Pabst Cans
Pokey,
I found the lids on a couple old automotive additive cans from the 50/60's. However, putting the lids on ended up being a pain-staking process. The metal on them was too soft. Also, since there was no chuck for the lids, they had to be applied to the Pabsts using hand tools. We're thinking that using some type of juice can lid might be the best solution, if we could find them in the proper size. It was costly for me, but well worth it!
I found the lids on a couple old automotive additive cans from the 50/60's. However, putting the lids on ended up being a pain-staking process. The metal on them was too soft. Also, since there was no chuck for the lids, they had to be applied to the Pabsts using hand tools. We're thinking that using some type of juice can lid might be the best solution, if we could find them in the proper size. It was costly for me, but well worth it!
