Decided to Remove the Dent and it Worked Out Nice
Moderators: Forum Moderator, Current Officers, Previous Officers
- DaveNH
- Deceased
- Posts: 996
- Joined: Tue Aug 23, 2011 11:10 pm
- Rusty Bunch Member Number: 1016
- BCCA Number: 6727
- eBay name: drt1r5
- Year Started Collecting: 1975
- Location: New Hampshire
- Has thanked: 363 times
- Been thanked: 436 times
- Zodiac:
- Contact:
- Status: Offline
Decided to Remove the Dent and it Worked Out Nice
Against the advice of Can Dr. (Keith N.) I decided to take to plunge and remove the dent from this rare quart flat. It took longer than I had anticipated, but I had to go slowly. I'm pretty happy with the results.
Thanks. Dave
- Summitcan
- Grand Marshall of Rust
- Posts: 1596
- Joined: Wed Jun 03, 2009 4:38 am
- Rusty Bunch Member Number: 894
- BCCA Number: 29714
- eBay name: Summitcan.573
- Year Started Collecting: 1974
- Location: Mid-Missouri
- Has thanked: 255 times
- Been thanked: 254 times
- Zodiac:
- Status: Offline
Re: Decided to Remove the Dent and it Worked Out Nice
Congrats - looks great .
I've tried to remove dents .
but not in my DNA
I've tried to remove dents .
but not in my DNA
To me it makes Goog Goog sense !
- mrlager428
- Grand Marshall of Rust
- Posts: 1634
- Joined: Mon Aug 25, 2008 3:54 am
- Rusty Bunch Member Number: 0
- Year Started Collecting: 1973
- Has thanked: 11 times
- Been thanked: 28 times
- Zodiac:
- Status: Offline
Re: Decided to Remove the Dent and it Worked Out Nice
Looks Great!!....Awesome Job
Collector of Wisconsin Cans.Looking for Pabst Bock Zip from Milwaukee.Milwaukee Valley,Rib Mountian and any Gettelman Picnic Series Cans in Grade 2/2- that held Beer.
- crowntainer
- Rust Master
- Posts: 488
- Joined: Tue Jan 20, 2009 10:11 pm
- Rusty Bunch Member Number: 933
- BCCA Number: 0
- eBay name: frommydoortoyours
- Year Started Collecting: 1974
- Location: NW Houston, TX
- Zodiac:
- Status: Offline
Re: Decided to Remove the Dent and it Worked Out Nice
That looks fantastic! Did you remove a lid or use a Bramlette Bender?
- DaveNH
- Deceased
- Posts: 996
- Joined: Tue Aug 23, 2011 11:10 pm
- Rusty Bunch Member Number: 1016
- BCCA Number: 6727
- eBay name: drt1r5
- Year Started Collecting: 1975
- Location: New Hampshire
- Has thanked: 363 times
- Been thanked: 436 times
- Zodiac:
- Contact:
- Status: Offline
Re: Decided to Remove the Dent and it Worked Out Nice
I removed the bottom lid as the dents were too deep & wide for the Bramlette Bender. I found some schedule 40 plastic pipe at HD that fit the can almost perfectly. Without that plastic pipe the results would have not been possible. Thanks for the kind words.
Thanks. Dave
- Flat_Top
- Rust Governor
- Posts: 3661
- Joined: Wed Aug 16, 2006 9:15 pm
- Rusty Bunch Member Number: 721
- BCCA Number: 15216
- eBay name: beer-1
- Year Started Collecting: 1976
- Location: Sarasota FL
- Has thanked: 155 times
- Been thanked: 123 times
- Zodiac:
- Status: Offline
Re: Decided to Remove the Dent and it Worked Out Nice
Very brave to work on that can. Great job.
Chuck
Michigan Cans wanted
Sell your Stuff, Keep the Dog, Live on an Island!
Michigan Cans wanted
Sell your Stuff, Keep the Dog, Live on an Island!